What should I do if I cannot connect to Bluetooth or cannot scan the QR code?

💡Please make sure to log in with the main account 

When the CuboAi camera cannot pair with Bluetooth, please try the following methods:

1. Check if Bluetooth permissions are enabled: Go to "Settings" on your phone > Find "CuboAi" > Confirm that the Bluetooth option is turned on.
2. Toggle Bluetooth off and on: Go to "Settings" on your phone > Find "Bluetooth" > Turn it off and then back on.
3. Please ensure that the CuboAi and the mobile device are within 5 meters of each other.

When the CuboAi camera fails to scan the QR code successfully, parents can try the following methods:

1. Make sure the lens protector has been removed and wipe the lens to eliminate situations where the lens is too dirty to scan the QR code
2. Check if the "brightness" of the phone screen is sufficient
3. Place the QR code on the phone about 20 cm in front of the CuboAi lens (about 1 palm-width distance). If scanning is still unsuccessful, try moving the phone slowly forward and backward
   
4. Restart the CuboAi App and try again
5. Rotate the lens to a "horizontal angle" and scan the QR code again
6. Check if the ambient light source is sufficient (it is recommended to turn on indoor lights, do not scan under natural light or sunlight), and there are no other light sources nearby or directly shining on the CuboAi camera lens

If you have any further questions, please contact us through the following channels:

• In-App: Settings → Chat With Us
• Facebook Messenger: m.me/cubobabymonitor
• Email: support@cuboai.com