How to improve the accuracy of CuboAi Monitor 3's AI detection?

Through image recognition, CuboAi detects whether Baby is in the crib, sends Covered Face alerts, and tracks your little one's Sleep events. To improve the accuracy of the baby monitor's AI detection, please refer to the guidelines below:

1. Ideal Setup

CuboAi Monitor 3 is most effective when it is placed directly above the crib with the baby monitor looking directly down at Baby and your crib filling the full screen. If the baby monitor is not set up in this recommended position, it may cause the baby monitor's AI to misjudge the events occurring and may result in inaccurate detection.

2. Ensure a clear, unobstructed view for CuboAi 

If there's a mobile hanging over the crib, we recommend placing it in a way that does not block the baby monitor's view of the crib. 

Keeping the crib clear by removing stuffed animals, pillows, and blankets to create a safe environment for your little one's sleep and improve detection accuracy.

3. Mattress Detection Zone Setting

When setting up "Calibrate AI" in the CuboAi App, make sure to only select the crib surface area, avoiding other regions such as railings, cabinets, or the parents' bed. This will ensure optimal detection performance.

🐦 Reminder: If the baby monitor has been moved to a different room or if your little one's sleeping arrangement has changed, please make sure to center the monitor and set mattress detection zone  accordingly.

4. Baby's head should be visible

CuboAi Monitor 3 detects Baby based on biological features (ie. the shape of Baby's head and facial features). If baby wears a hat or anything that covers the head, it may affect the baby monitor's detection accuracy.

🐦 Reminder:

1. CuboAi Monitor 3's Covered Face detection can detect Baby's hands and rule out scenarios where Baby's face is covered by his/her hand. However, if Baby wears gloves or if the hands are covered with cloth, a Covered Face alert may still be sent based on your Alert Settings.

2. If you're using a bedside crib or co-sleeping with your little one, the baby monitor may detect the movements of the caregiver, which may result in inaccurate notifications.

5. Ensure that AI Status shows "Working Normally"

For users that have the AI detection features available, please ensure that the AI Status is enabled on the CuboAi app. You can check this by going to the Home Page → click on the menu icon → “check” AI Status.

Please note that at least one of the following AI features must be switched on to see the AI Status button: 

• Covered face & Rollover alerts
• Danger Zone Alerts
• Auto Photo Capture
• Lullaby AI mode
• Sleep Sensor Pad AI mode

After clicking “check” on the AI Status, you’ll see one of the following messages:

• AI is working normally 
• AI is not working (Please double-check that you have met all previously mentioned requirements in this article and try again). 
• Please check your internet connection, or update the app and firmware to the latest before try again. (Please check that your Wi-Fi connection is stable and reconnect if needed).

If you’re not able to see the AI Status option in the menu, please double-check that you are using the latest app version, your baby monitor is on the U-stand, and that it is on the latest firmware version. 

After confirming that the environment for using CuboAi at home meets the above instructions, if there are still inaccurate notifications, parents can report inaccurate AI notifications through the notification page to help us continuously optimize CuboAi's AI functionality.

If you have any further questions, please contact us through the following channels:

• In-App: Settings → Chat With Us
• Facebook Messenger: m.me/cubobabymonitor
• Email: support@cuboai.com