How to stick & remove CuboAi Smart Temp Tape ?

Note: please click on "CuboAi Smart Temp Tape" to buy refill packs on the official website.

💡"CuboAi Smart Temp" is not compatible with CuboAi(Gen1).

CuboAi Smart Temp Tape is skin-friendly and made of low-sensitive medical-grade silicone. Before sticking, it is recommended to clean and dry the underarm to maintain optimal adhesion.

• When Sticking：

Step 1: Please remove the paper liner on one side of the tape, align the notch with the temperature sensing (rectangular) area of the Smart Temp and apply the tape to CuboAi Smart Temp.

Step 2: Then, remove the paper liner on the other side, and stick the Smart Temp to the upper edge of the baby’s underarm, making sure that the side with the power button is facing toward the back of the body.

• When Removing：

Step 1: Gently press the skin below the Smart Temp Tape and slowly peel the tape up with the other hand. The Smart Temp and Smart Temp Tape can be removed together. 

Step 2: To remove the Smart Temp Tape from the Smart Temp, it is recommended to use your thumb/finger to slowly roll the tape off (this method will leave less residual glue). It is also recommended to clean the adhesive side of the Smart Temp afterward to avoid affecting the adhesiveness in future uses. 

🐦Reminder:

1. Be sure to use the Smart Temp Tape

2.The Smart Temp Tape is a disposable item and cannot be reused. It needs to be replaced once it has been removed from the skin. Additionally, it is recommended to replace the Smart Temp Tape once the stickiness wears off to ensure an accurate body temperature reading. 

3. If used continuously for a long time, the placement of the Smart Temp should be alternated between the left and right underarms each day, and the Smart Temp Tape should be replaced each time. 

If you have any further questions, please contact us through the following channels:

• In-App: Settings → Chat With Us
• Facebook Messenger: m.me/cubobabymonitor
• Email: support@cuboai.com