How do I connect the Sleep Sensor Pad to CuboAi?

💡Not applicable to the first-generation CuboAi.

• Connection Steps

Please refer to the following steps or consult theCuboAi Smart Sleep Monitor Quick Installation Guide to connect the CuboAi Sleep Sensor Pad with the camera:

Step 1. First, please ensure that your phone (please use the main account device for setup) has been paired with the camera

Step 2. The Sleep Sensor Pad uses M3 screws (diameter 5 mm x length 8 mm). It is recommended to use a No. 2 screwdriver to turn the screws on the battery cover, then insert 4 AAA alkaline batteries into the Sleep Sensor Pad, confirm that the indicator light at the back of the Sleep Sensor Pad shows flashing blue light, or press the button on the back of the Sleep Sensor Pad to ensure the blue light is on. (To save battery power, the indicator light will turn off after flashing for five minutes. To check the light status, simply press the button on the back of the Sleep Sensor Pad.)

Step 3. Next, please enter the CuboAi App settings page

Step 4. Select the camera you want to adjust from the tabs above

Step 5. Scroll down to find the Cubo Ai Sleep Sensor Pad, click on "Sleep Sensor Pad Tutorial" and follow the instructions in the app to move the Sleep Sensor Pad close to the camera within 1 meter for Bluetooth connection.   

🐦 Reminder

1. Please ensure that the firmware and the app are up to date

2. The Sleep Sensor Pad can only be used with alkaline batteries installed, other types of batteries (such as rechargeable batteries, zinc-carbon batteries, etc.) are not suitable.

If you have any further questions, please contact us through the following channels:

• In-App: Settings → Chat With Us
• Facebook Messenger: m.me/cubobabymonitor
• Email: support@cuboai.com