Stand Assembly Instructions - CuboAi/CuboAi Plus

🐤 CuboAi Tip: For a smooth setup experience, please download the Cubo Ai App and create an account prior to assembling the stand or connecting CuboAi/CuboAi Plus to a power source.

• CuboAi
• CuboAi Plus

CuboAi 

Please refer to the Quick Start Guide for instructions on how to assemble. 

• Crib Attachment
  
  
  
• Floor Stand
  
• Mobile Stand
  

Friendly Reminder: CuboAi should only be plugged into a power source after being properly and securely attached to a stand. You can confirm that CuboAi is plugged in properly by checking the status light on the multi-purpose button. When CuboAi is starting up, you will see an aqua blue status light. The status light will turn green once CuboAi is in Setup Mode and ready for pairing!

Examples:

There should be no gap between CuboAi and the U-shaped Camera Holder/Mobile Dock when it’s properly attached.

If there is a gap between your camera and the stand, CuboAi will not be able to function regularly. Please make sure you hear a click after putting on the camera to ensure stable connection and device security.

CuboAi Plus

Please refer to the Quick Start Guide - 3 Stand Set or Quick Start Guide - Wall Mount Set for instructions on how to assemble. 

CuboAi Reminder: Before connecting CuboAi Plus to power, please make sure to connect the Temperature & Humidity Dongle between the camera and the cable to make sure CuboAi Plus shows the Temperature & Humidity readings properly in the CuboAi App.

3 Stand Set

• Crib Attachment (it is recommended to install the crib attachment under the bed board/bottom of the railing)
  
  
  
• Floor Stand (it is recommended to slide the entire floor stand base under the crib to maintain the stability and balance of the stand, and to help save space.)
  
  
  
  
• Mobile Stand
  

Wall Mount Set

• Wall Mount
  
  

Customer Support Contact Information:

In-App: Settings -> HELP CENTER -> Chat with Us
Facebook Messenger: m.me/cubobabymonitor
Email: support@cuboai.com